Daily maintenance of shredder

United Tech machinery always insists on recommending the most suitable shredder for you at the lowest cost and the highest quality, and always helps you to keep your shredder in good operation. Our professional after-sales team is always on standby behind you. If you want to obtain a shredder with a long service life at the same cost, the daily maintenance is also a necessary step. Pay attention to the following items during daily maintenance:

Precautions for maintenance of shredder:

① When inspecting, repairing and maintaining the shredder, the power supply must be cut off and warning signs must be hung.

② Only after the shredder is completely stopped, can the shredder be inspected, maintained and replaced.

③ Visually check the blade every week for damage or tooth breakage.

④ Measure the tool radius and thickness to arrange the best time for tool repair.

⑤ The blades shall be repaired regularly, and the frequency of repair welding varies according to the type of broken garbage. Once the blade is damaged, it must be repaired immediately.

⑥ When the repair fails, replace the blade.

Daily instructions:

1. Before work, the remaining materials in the cutter box that have not been broken shall be broken before shutdown.

2. Turn off the power switch, clean the materials scattered around the crusher, and check whether there are loose screws at the joint of the motor and the reducer.